Disclaimer:
This article may contain information regarding different medical conditions, the effects of various substances on health, and other related information for informational purposes only.
The information on this site should not be taken as a substitute for the advice that can be provided by a doctor or any other healthcare professional.

Your Step-by-Step Guide to Cleaning A Grinder

| QuikfillRx

Cleaning your grinder is a very easy process. You should make a habit out of cleaning your grinder regularly.

The grinder is one of the most used smoker accessories.

A real smoker has a well-used kit that he keeps by his side, maybe even several pieces. Because these grinders are used often they tend to get dirty over time. Materials start to cake and that can affect the quality of the grind they produce.

This article will look into the steps on how you can keep your grinder clean.

 

 

Keeping Your Grinder Clean

Grinders will normally last for a long time. It’s just important that you learn how to clean yours properly. It’s not a complicated process. These grinders don’t have complex moving parts that can get messed up.

 

 

 

Tools You Will Need

Before we go through the steps on how you can clean your grinders, let’s name the tools that you will be needing for the process. The good news is that you will have access to these tools already. It’s not like you will need some specialized equipment for cleaning up your grinder.

  • Cup
  • Rag
  • Tray
  • Toothbrush
  • Q-Tips
  • Alcohol

Here are the steps that you can follow:

1. Assemble Your Grinder
Start by disassembling your grinder. The simple grinders which are most of the ones that are available in the market are normally made up of two halves. The more expensive grinders have multiple sections as it may have parts for storage.
2. Use a Toothbrush
Start cleaning the parts using your dry toothbrush. It doesn’t have to be a new one. You can just use the old one that you are replacing and use it for your grinder. Start by scrubbing the surface of the grinder with a gentle motion. Remember not to be too harsh with your movement.
The gentle brushing should be enough to remove the debris that are on the grinder surface. Some grinders are equipped with screens that are used for screening larger particles. Make sure that you do not damage the screen while cleaning it.
3. Pour a Little Alcohol
Pour a little alcohol into the cup and then dip the brush into it. Repeat the brushing process but this time with the alcohol which will disinfect the whole grinder.
Pay extra attention to the teeth of the grinder since there could be debris there that can get stuck. For the harder to reach spaces, you can use Q-Tips or cotton swabs dipped in alcohol for cleaning.
4. Use Warm Water
After you are done cleaning with alcohol, you can start cleaning it with warm water. You want to take out all the traces of the alcohol that you used in cleaning the grinder. Place the different parts of the grinder on a tray and then rinse them in running water one by one.
5. Dry the Pieces
Once you are done cleaning the grinder parts with water, you can start drying the pieces using the rag or the thin towel. One of the main reasons why you need to clean your grinder is to prevent the growth of mold and bacteria. So, it’s important that you keep your grinder as dry as possible.
For the best results, you should allow them to dry overnight.
 

Once you have gone through the steps we have listed here, your grinder should be ready for use again. You should notice a major difference when you use it for the first time after cleaning. You will also notice how it quickly accumulates debris right after you have cleaned it.

It’s all up to you as to when you should clean your grinder. Normally, after 10 uses, it is not going to be doing its best.

 

When Your Grinder Needs a Replacement

So, when do you have to replace your grinder?

While you can keep your grinder functioning and free from bacteria and mold by cleaning regularly, eventually you will have to replace it. These are just some of the warning signs that you’re grinder is in need of a replacement:

  1. 1. The magnets that are supposed to be holding it together are not doing their job anymore.
  2. 2. You’re seeing metallic debris inside the grinder.
  3. 3. The screens are damaged.
  4. 4. The grinder teeth have been damaged.
  5. 5. The o-rings that are supposed to keep it sealed have been lost.

 

You see any of those signs on your grinder and that just means you need a new one.

Choosing the Right Grinder

How do you go about choosing the new grinder to replace your old one?

There are different types of grinders that are available. You can choose to get the Printed Kitchen Tool Mix A, for example, is a typical grinder with a colorful design. It’s ideal for use with your friends.

If you’re a more practical kind of person, then the Mini Metal Key Chain Grinder might have more of an appeal for you. Since it doubles as a keychain, you can carry it around with you wherever you go.

Those are just a few of the grinder options available at www.quikfillrx.com. If you own a cannabis dispensary, you should check out the accessories available there.

×
Welcome Newcomer